Which wallets support Robinhood Chain? The quick verdict
| Wallet | Robinhood Chain support | Best for | Notes |
|---|---|---|---|
| Robinhood Wallet | Native — built in | Beginners, stock token holders | The chain's home wallet; also the only route to Robinhood's tokenized stocks (120+ countries, not the US) |
| MetaMask | Full support via manual network add | Most users, DeFi and DEX traders | The default EVM wallet; add chain ID 4663 once and everything works — full walkthrough |
| Rabby | Full support via custom network add | Active traders, power users | Pre-transaction simulation and approval warnings are genuinely useful on a scam-heavy chain |
| Trust Wallet | Supported via custom EVM network add | Mobile-first users | Add the network manually with the same chain ID 4663 details |
| OKX Wallet | Supported | Multi-chain traders | Listed among wallets supporting the chain from early on |
| Phantom | Not supported for custom networks | — | Phantom's EVM support covers a fixed set of chains and does not allow adding custom networks like Robinhood Chain [PLACEHOLDER: verify Phantom's current Robinhood Chain support status before publish] |
Two structural facts sit behind this table. First, because the chain is EVM-compatible, "support" is mostly a question of whether a wallet lets you add custom networks — any wallet that does can reach Robinhood Chain. Second, gas on Robinhood Chain is paid in ETH (there is no native chain token), so whatever wallet you choose, you'll fund it with bridged ETH — our Robinhood Chain bridge guide covers the routes.
A useful consequence of the first fact: your address is portable. The same seed phrase produces the same address in MetaMask, Rabby, and Trust Wallet, and your assets live on the chain, not in the app. You can start in one wallet, switch to another later, or run two side by side without moving anything — importing a seed phrase into a second wallet is enough. (Robinhood Wallet is the partial exception: it's self-custody too, but its stock token features don't follow your address into other wallets.) This is also why "which wallet" is a lower-stakes decision than it feels — the choice you can't easily undo is the security of the seed phrase itself, not the app that holds it.
On Phantom, plainly. "Robinhood chain phantom" is one of the most-searched wallet queries about this chain, and nobody answers it directly, so here it is: Phantom expanded beyond Solana to support EVM chains, but its EVM support is limited to a fixed list of networks chosen by Phantom, with no option to add a custom RPC. Robinhood Chain is not on that list, so as of this writing you cannot use Phantom on Robinhood Chain. [PLACEHOLDER: verify Phantom's current Robinhood Chain support status before publish — if Phantom has added the chain or custom network support, update this section and the table.] If Phantom is your main wallet, the practical move is to install MetaMask or Rabby alongside it using a separate seed phrase, and use that for Robinhood Chain.
Which Robinhood Chain wallet should you use?
If you're new to on-chain trading: Robinhood Wallet. Native support means no network configuration, no RPC fields, no chain ID — the chain is just there. It's also the only wallet that gives you Robinhood's tokenized stocks, available in 120+ countries (not in the US), priced by Chainlink oracles across 95 equities. The trade-off is that you're inside one company's product decisions; if you outgrow it, your on-chain assets can move to any EVM wallet.
If you trade DEXs and DeFi regularly: MetaMask or Rabby. MetaMask is the connective tissue of EVM DeFi — every dApp on Robinhood Chain, from Uniswap to Team Finance to Morpho, connects to it first. Setup is a one-time manual add covered in our MetaMask on Robinhood Chain walkthrough. Rabby earns its place for one reason that matters more on this chain than most: it simulates transactions before you sign and flags suspicious approvals. On a chain where honeypots and copycat tokens are documented weekly, a wallet that shows you what a signature will actually do is not a luxury.
If you live on mobile: Trust Wallet or Robinhood Wallet. Trust Wallet handles custom EVM networks and keeps the full DeFi surface available through its dApp browser. Robinhood Wallet is the lower-friction option if native support matters more to you than ecosystem breadth.
If you're a builder or launching a token: MetaMask or Rabby, plus discipline. Deploying contracts, creating Uniswap pools, and managing locks all run through standard EVM tooling. Use a dedicated deployer wallet, keep it separate from your personal funds, and if you're launching, note that MintPlus handles deploy, pool creation, and the Team Finance LP lock in one guided flow — see our token launch guide.
Whatever you choose, the wallet is the smaller decision. The habits in the safety section below are the bigger one.
How do you add Robinhood Chain to any EVM wallet?
Every EVM wallet with custom network support uses the same five fields. Enter them exactly:
| Field | Value |
|---|---|
| Network name | Robinhood Chain |
| Chain ID | 4663 |
| RPC URL | https://rpc.mainnet.chain.robinhood.com |
| Currency symbol | ETH |
| Block explorer | https://robinhoodchain.blockscout.com |
In MetaMask: Settings → Networks → Add network → Add manually, paste the five fields, save, then switch to Robinhood Chain in the network selector. Rabby and Trust Wallet follow the same pattern under their custom network menus. The testnet, if you need it for development, is chain ID 46630. Full click-by-click, including verification that the add worked, in the MetaMask setup guide.
Two rules for the add itself. Type the values from this page or from the official docs at docs.robinhood.com/chain — don't copy them from a Telegram message or a random site. And after adding, sanity-check it: the network selector should show an ETH balance of zero (until you bridge funds in) and the explorer link should resolve to Blockscout. A wrong RPC fails obviously; a malicious one doesn't, which brings us to safety.
How do you keep a wallet safe on a chain with a scam wave?
Robinhood Chain's scam wave is documented, not theoretical: honeypot tokens flagged in Relay Protocol warnings, copycat tickers cloning trending names, KuCoin-reported "vanishing tokens," and a fake Solana token literally named "Robinhood Chain." There is no Robinhood Chain token and no airdrop — any wallet prompt, site, or DM claiming otherwise is an attack. On this chain, wallet hygiene is not generic advice. Four habits:
Treat one-click "Add network" buttons as untrusted. Scam sites offer convenient add-network prompts wired to a malicious RPC. A malicious RPC controls what your wallet displays — balances, transaction results — and can feed you a fabricated picture while phishing sites work you for signatures. Add the network manually, once, from the official values (chain ID 4663), and you never need to accept anyone's network prompt again.
Read every approval before signing. Token approvals are standing permissions: an unlimited approval granted to a malicious contract is a drain waiting for a trigger. Approve specific amounts where practical, and review and revoke stale approvals regularly — from your wallet's connected-sites and approvals settings, or via Blockscout. This habit neutralizes most of what phishing actually steals.
Never sign what you don't understand. Blind signature requests — opaque hex, unexpected setApprovalForAll, permits for tokens you didn't ask to move — are how wallets get emptied without a "hack." Rabby's simulation helps; so does the free version: when a signature request surprises you, close it.
Verify tokens before they enter your wallet. Most losses on this chain aren't wallet compromises — they're bad purchases. Check the contract, the liquidity lock, and the sell history before you swap; our token safety checklist and our how to buy on Robinhood Chain guide build the routine. And treat unsolicited tokens that appear in your wallet as bait, not gifts — interacting with them is the trap.
One more, for anyone holding meaningful size: a hardware wallet used through MetaMask or Rabby keeps your keys off the internet-connected device entirely. As of early August 2026, the chain reached a ~$775M TVL all-time high on August 6 and passed Base in daily active users within three weeks of mainnet — there is real money here, and attackers know it.
And the habit that outranks all of the above: protect the seed phrase. Every wallet in the comparison table is self-custody, which means the twelve or twenty-four words are the wallet — anyone who has them has everything, on every chain, in every app that address touches. Write them down offline, never type them into a website, and know that no legitimate product, including ours, will ever ask for them. "Verify your wallet by entering your recovery phrase" is the oldest scam in crypto, and the chain's airdrop-bait wave has given it a new coat of paint.
FAQ: Robinhood Chain wallets
What is the best wallet for Robinhood Chain? For beginners, Robinhood Wallet — native support, zero configuration. For active DeFi and DEX users, MetaMask or Rabby with the network added manually (chain ID 4663). There is no single best; any EVM wallet with custom network support works, so choose by how you trade.
Does Phantom support Robinhood Chain? No, as of this writing. Phantom supports a fixed set of EVM chains and does not allow adding custom networks, and Robinhood Chain is not on its list. Use MetaMask, Rabby, or another custom-network EVM wallet instead. [PLACEHOLDER: verify Phantom's current Robinhood Chain support status before publish]
Does Trust Wallet work with Robinhood Chain? Yes, via its custom EVM network feature. Add the network manually with chain ID 4663, RPC https://rpc.mainnet.chain.robinhood.com, currency symbol ETH, and explorer robinhoodchain.blockscout.com. Once added, Trust Wallet sends, receives, and connects to Robinhood Chain dApps like any other EVM network.
Do I need the Robinhood app to use Robinhood Chain? No. Robinhood Chain is a public, EVM-compatible blockchain — any EVM wallet can connect to it, and no Robinhood account is required. The exception is Robinhood's tokenized stocks, which are offered through Robinhood Wallet specifically, in 120+ countries but not the US.
What token do I need for gas on Robinhood Chain? ETH. Robinhood Chain has no native gas token of its own — it's an Arbitrum Orbit L2 that posts data to Ethereum, and all transaction fees are paid in ETH. Bridge ETH in via the canonical Arbitrum bridge at portal.arbitrum.io or third-party routes like Relay, Across, or Stargate.
Is there a Robinhood Chain wallet with an airdrop? No. There is no Robinhood Chain token and no airdrop, so no wallet can offer one. Sites and messages promising a "Robinhood Chain airdrop" for connecting your wallet are scams designed to harvest approvals and signatures — a fake token using the chain's name already circulates on Solana.
Your wallet is where every Robinhood Chain decision starts — and if the chain becomes more than a place you trade, it's also where your first launch starts. When you're ready to build instead of just buy:
Launch your token with MintPlus — free to start, pay only gas → [PLACEHOLDER: MintPlus Robinhood Chain URL]
Explore the rest of our Robinhood Chain guides at the Robinhood Chain hub.
TrustSwap is not affiliated with, endorsed by, or sponsored by Robinhood Markets, Inc. Robinhood Chain is a product of Robinhood Markets. All product names are used for identification purposes only.
Launch your token with MintPlus — free to start, pay only gas
Get startedTrustSwap is not affiliated with, endorsed by, or partnered with Robinhood Markets, Inc. Robinhood Chain is an independent network; references to it are descriptive only. Nothing here is financial, investment, tax, or legal advice. Token launches carry risk — do your own research.